2025 Exmark Lazer Z E-Series LRE730GKA604A3

Selling Price -

Click for a Quote

23.5 HP Kawasaki engine, 60" deck, suspension seat

Information

2025 Exmark Lazer Z E-Series LRE730GKA604A3

Product Overview

As the most affordable model in the Lazer Z line, the all-new 2025 Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. Select from 48-, 52-, or 60-inch UltraCut Series 4 cutting decks, all equipped with a newly redesigned discharge chute that distributes clippings over a wider area. A choice of twin-cylinder Kawasaki, Kohler, or Vanguard twin-cylinder commercial engines are available, all equipped with heavy-duty external air filters. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.

Like our entire lineup of zero-turn mowers, the Lazer Z E-Series delivers unmatched durability and long-term value. Be sure to check out the rest of the Lazer Z family, including the Lazer Z S-Series zero-turn mower.

Features may include:

Unibody Frame
  • The Lazer Z E-Series utilize a one-piece unibody frame that delivers increased durability with fewer parts –– a classic case of “less is more”.
Less Time At The Pump
  • Lazer Z E-Series models feature a single 9.5-gallon fuel tank with a single fill location.
Ultracut Series 4 Deck
  • Built from formed and welded high-strength steel, UltraCut Series 4 full-floating decks feature maintenance free spindles with splined blade drivers to stop bolt tightening on impacts. The idler arm pivot bearings are also maintenance free.
Tool-less Belt Removal
  • The deck and hydro belts can be installed and removed without tools.
Reduced Maintenance
  • With just two annual grease points and maintenance-free sealed bearing spindles, the Lazer Z E-Series delivers maximum performance with minimum maintenance.

Photos

Highlights

  • Perryville
  • New
  • 35683
  • 2025
  • Exmark
  • Lazer Z E-Series LRE730GKA604A3
  • Model: FX730V | Series: V-Twin | Spec: FX730V-FS26-R
  • 23
  • Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. | Speeds: Infinitely Variable
  • Gas
  • Available
  • 72.7"
  • 70.1" | Cutting: 1.5" to 5.5" in 0.25" increments.
  • 60
  • Fabricated
  • Kawasaki

Specifications

  • 2025
  • Exmark
  • Lazer Z E-Series
  • LRE730GKA604A3
  • Zero-Turn Mower
  • Model: FX730V | Series: V-Twin | Spec: FX730V-FS26-R
  • Kawasaki®
  • Electric
  • 726 cc
  • 23.5 hp
  • 3700 rpm
  • Heavy-duty canister air filtration system
  • Carbureted | Fuel Indicator: Mechanical float
  • Gas Carbureted
  • Engagement: MagStop electromagnetic 175 -ft-lb clutch
  • Hydro-Drive | Drive Wheel Release: Allows unit movement without engine running.
  • Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
  • Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. | Speeds: Infinitely Variable
  • Lever-actuated pawl brake.
  • 13 x 6.5-6, smooth tread, pneumatic. Sealed Ball Bearings
  • 24 x 12-12, 4 ply Super Turf TL
  • 12V battery with 15 amp. alternator.
  • Forward: 11.0 mph | Reverse: 0–6.0 mph
  • Blade: Approximately 18,500 fpm.
  • 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt, and 7-gauge reinforcement plate welded to spindle mounting locations for improved strength.
  • Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters Forks: .50" thick caster yoke arms.
  • 72.7"
  • Deck: 60"
  • 84.6" | 3 blades at 20.50" length
  • 70.1" | Cutting: 1.5" to 5.5" in 0.25" increments.
  • Blade Cutter Housing: 7.75" | Blade Shaft: 98"
  • 9.5-gallon single fuel tank with single fill location
  • Curb: 1062 lbs.
  • UPC: 193308242200
  • Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft fom Operators Position.
  • Caster Forks: Cast steel caster fork | Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • 60
  • Fabricated
  • Kawasaki